System Configuration :
Grid Tied
1. Car Charger
2. Meter Main Combo
3. Inverter
4. Battery Cabinet (Battery Module(s) and PDU)
5. Cable Tray
6. Edge controller (IPC)
Suggested distance between Inverter and battery/Meter Main is no less than 8”
Include manual best practices when doing the layout along with measurements between each item and maximum and minimum height to be installed per the manual.
Note: above images show equipment required for this configuration. As each home is different, some of this equipment is placed outside, and some is placed inside.
System Configuration :
Partial Home
1. Car Charger
2. Meter Main Combo
3. Outdoor/Indoor Circuit Breaker Enclosure
4. Inverter
5. Battery Cabinet (Battery Module(s) and PDU)
6. Cable Tray
7. Edge controller (IPC)
Suggested distance between Inverter and battery/sub panel is 8”
Include manual best practices when doing the layout along with measurements between each item and maximum and minimum height to be installed per the manual.
Note: above images show equipment required for this configuration. As each home is different, some of this equipment is placed outside, and some is placed inside.
System Configuration :
Whole Home
1. Car Charger
2. Meter Main Combo
3. Outdoor Circuit Breaker Enclosure
4. Smart Switch
5. Inverter
6. Battery Cabinet (Battery Module(s) and PDU)
7. Cable Tray
Suggested distance between Inverter, smart switch, battery and Meter Main is 8”
Include manual best practices when doing the layout along with measurements between each item and maximum and minimum height to be installed per the manual.
Note: above images show equipment required for this configuration. As each home is different, some of this equipment is placed outside, and some is placed inside.
